Specifications:

• Voltage: AC 110v-120V, 220v-240v, 50-60Hz
• Power: 2000W
• LEDs: 8 + 8 RGB 3-in-1 LEDs
• Smoke spray angle: Adjustable
• DMX channels: 13CH
• Control options: DMX, remote, DMX512, manual
• Any colors can be mixed; two sets of LEDs can emit different colors.
• Warm-up time: 3 minutes
• Gross weight: 6.5 kg
• Packaging dimensions: 43*37*23.5 cm

Fire Prevention:

• For adults only. Keep the smoke machine out of reach of children and exercise extreme caution during operation.
• Do not spray directly on or near anyone.
• The smoke is very hot; keep at least 100 cm between the machine and other objects. (Do not touch the machine surface if it is 40-80°C.)
• Place the machine in a well-ventilated area and do not cover the cooling holes to maintain optimal cooling effect. Keep at least 20 cm between the smoke machine and surrounding objects, and at least 20 cm between the smoke machine and any source of fire. Keep any easily burnt objects within 300 cm (keep away from carpets, wood, and flammable materials).

To avoid explosions:

• Do not add flammable liquids such as oil, gas, or perfume to the mist machine.
• Pay special attention to all warning signs and operating instructions on all machines.
• Use high-quality mist fluid recommended by the dealer. Inferior mist fluid may explode or spray oil.
• Check for sufficient mist fluid regularly.
• Remove all mist fluid from the mist machine before transporting or mailing.
• Do not ingest mist fluid; if ingested, seek medical attention immediately. If mist fluid comes into contact with the machine, wash skin and eyes with clean water.

Installation:

• Remove all packaging materials, especially the spray nozzle.
• Set up the machine horizontally and open the liquid tank cap.
• Add high-quality misting liquid to the machine and tighten the liquid tank cap. Low-quality misting liquid will damage the machine.
• Plug the remote control plug into the socket on the back of the machine.

Repair:

• Please clean the fog machine promptly to prevent damage to spare parts and reduce repair costs.
• Do not allow the fog machine to become dirty. Replace the lid and refill the tank with fogging liquid.
• After approximately 40 hours of continuous use, clean any dirt in the dry pipe with 80% distilled water and 20% vinegar.
• Remove the nozzle and clean it with vinegar to maintain the same speed as before heating.
• After cooling, reassemble the nozzle and refill with fogging liquid for the next use.